Installing a garden watering system is easy – with a little help from Mitre 10.
Wouldn’t it be nice if you could arrange for it to rain, precisely when your plants and garden needed it? Well, installing a fixed
watering system is probably the next best thing. And no matter what stage of development your yard is in, installing a garden watering system is easy for anyone.

Download PDF (2.9Mb)

Copyright Mitre 10 Australia Pty Ltd. Reproduction prohibited other than for personal use. Information intended as a guide only and should not be relied upon without further enquiries for your specific purpose. All liability for any loss or damage incurred from reliance upon this information is excluded.

Get a quote

To get everything you need, select the items from the list below and hit get a quote.

Everything you need

Product Checklist

	Nut and Tails	for connecting to the tap.
	Joiners	for straight connectors.
	Tees	for T-junctions.
	End Stops	to seal open ends in tubing.
	Locking Clamps	for all connections to prevent leaks.
	Punch/Spanner	for fitting sprays etc to tubing.
	Repair Plugs	to seal unwanted holes in tubing.
	Filter	to take out rust and impurities in pipe line.

Tools for the Job

	Measuring tape
	Spade
	utility knife or secateurs
	9 litre household bucket

Print