Build an attractive lattice fence feature - with a little help from Mitre 10.
Lattice comes in a range of different materials and can be pre-prepared for easy installation or made yourself to your exact specifications. The end result is a visually attractive feature that can be painted or used for training plants. Our guide will explain all the options and get you started

Download PDF (1.9Mb)

Copyright Mitre 10 Australia Pty Ltd. Reproduction prohibited other than for personal use. Information intended as a guide only and should not be relied upon without further enquiries for your specific purpose. All liability for any loss or damage incurred from reliance upon this information is excluded.

Get a quote

To get everything you need, select the items from the list below and hit get a quote.

Everything you need

Product Checklist

	Posts	100 x 100mm x 2400mm long
	Rails	100 x 50mm x 2400mm long
	Lattice	2 sheets per panel 900mm wide x 2400mm long
	Joists	unseasoned hardwood or treated radiata pine 100 x 50mm
	Galvanised nails	75 x 3.75mm bullet head for rails 50 x 2.8mm flat head for lattice
		Dry cement
		Stakes
		50 x 25mm timber bracing
		Timber post hole sole plates (or concrete if desired)

Tools for the Job

	Measuring tape
	Pencil
	Power saw or hand saw
	Claw hammer
	String line
	Spirit level
	20mm wood chisel
	Shovel or post hole digger

Print