Pull the plug on your old bathroom - with a little help from Mitre 10.
Apart from plumbing and electrical work, which must be done only by qualified tradespeople, renovating a bathroom is within the scope of the average handyperson and can save you thousands of dollars.

Download PDF (1.8Mb)

Copyright Mitre 10 Australia Pty Ltd. Reproduction prohibited other than for personal use. Information intended as a guide only and should not be relied upon without further enquiries for your specific purpose. All liability for any loss or damage incurred from reliance upon this information is excluded.

Get a quote

To get everything you need, select the items from the list below and hit get a quote.

Everything you need

Product Checklist

		Villaboard fibre cement sheets
		30 x 2.8mm Galvanised fibre cement nails
		"Wet Area" flashing
		Continuous galvanised metal angle (for internal corners)
		Perforated metal angle (for external corners)
		Joint bedding cement
		Topping compound
		120 grit sandpaper
		Perforated paper reinforcing jointing tape
		Flexible silicone sealant

Tools for the Job

	Hand saw
	Electric drill and bits set
	Tungsten-tipped 'score and snap' knife
	Hand guillotine
	Claw hammer
	Rasp file
	Trowel or broad knife
	Electric planer
	Sanding float
	Hole saws (optional)
	jigsaw and tungsten-tipped blade (optional)

Print