Bostik Plumbers Mate PVC Pipe Cement ? Type P

Product SKU: 9310492259994

Bostik Plumbers Mate PVC Pipe Cement ? Type P

Product SKU: 9310492259994

  • PVC Type-N Pipe Cement
  • 1 L
  • Blue
Overview Bostik 345040 Type-N Pipe Cement, Appearance: Liquid, Capacity: 1 L, Ketonic Odour, Specific Gravity: 0.94, Viscosity: Brushable, Medium Bodied, VOC: 732 g/L, Solubility: Insoluble in Water, Flash Point: -4 deg C, Relative Vapour Density: >1, Vapour Pressure: 9,500 Pa at 20 deg C, Flammability Limits (%): LEL ? 1.8; UEL ? 11.5, 515 deg C Auto-Ignition Temperature
Benefits & Features
  • Water Mark certified as per the plumbing code of Australia
  • Colour coded packaging for easy product selection
  • Ready to use - no mixing required
  • Good application viscosity - easily applied with minimal dripping
  • Natural bristle brush applicator for easy application
Recommended Use For jointing pipes 100mm or less in diameter, Plumbing applications, Bonding PVC-U sheets, Jointing PVC-U conduits in electrical applications
What you need to know before purchasing

Not all stores carry stock of this product, but will order it in for you. Please allow up to 14 days for stock to arrive at your selected store.
- Products are available while stocks last
- Please allow up to 14 days for stock to arrive at your selected store
- Contact your local store to check stock availability
- Images are for illustration purposes only

Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any further reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au

Appearance Liquid
Auto Ignition Temperature 515 deg C
Capacity 1 L
Care Instructions _
Flash Point -4 deg C
Odor Ketonic
Relative Vapor Density >1
Specific Gravity 0.94
Viscosity Brushable, Medium Bodied
VOC Content 732 g/L

DIY & Ideas

Sinks & Taps

How to apply sealants in wet areas

Applying fresh sealant in your bathroom helps keep mould and water damage at bay, so here’s a few tips on how to apply sealant. Half the secret is in the application and the other is the sealant, so make sure you pick a quality waterproof quality sealant.