Damp Stop is a unique primer and protective coating that protects surfaces against rising damp and moisture ingress through walls and floors. Designed to protect surfaces such as concrete, masonry and general porous mineral surfaces to prevent the entry of dampness or moisture vapour into the built environment. Betta Damp Stop is one component requiring no mixing while offering the advantages of being solvent free and odourless. Also suitable as an anti-dust treatment for aged cement floors and dusty cement screeds.
Features
Outstanding adhesion properties
1 component product, avoids mixing and rapid drying wastage common with 2 component epoxy based primers
Suitable for internal, external underground and immersed applications
Can be sand filled for high build repairs (use dry sand)
Solvent free and odourless safe in confined areas
Time-saving and user friendly
Uses
Priming external floors before applying membranes
Protecting timber flooring, carpet and vinyl against rising damp
Sealing internal walls of cellars and basements against negative moisture vapour and dampness
Sealing the internal face of underground walls against residual moisture
Preparing and stabilising aged and dusty screeds for floor finishes
Priming Hebel and aerated concrete surfaces
Damproofing surfaces
Protecting surfaces against negative hydrostatic pressure
Coverage and Usage
General coverage as a vapour barrier primer and surface enhancer is 1 Litre/6–8 m²
Optimum coverage on walls or floors against negative pressure and moisture is 1 Litre/3–4 m²
Repairing and stabilising dusty screeds and aged concrete, coverage is 1 Litre/6m². Fine sand can be mixed with Damp Stop resin at a ratio of 3 parts sand to 1 part resin used in this type of application. For areas greater than 1mm, apply by spatula. Do not exceed 3mm high
Lightly stir product before using. Apply with a short nap roller or short bristle brush
Allow 3–6 hours drying between coats
Apply 2nd coat in opposite direction to preceding coat
Allow a minimum of 24 hours drying before applying finish membrane coatings or adhesives
Many Mitre 10 stores offer a local delivery service. Contact your local store about what options you have for local delivery.
Returns
This Policy is provided by the Mitre 10 store participating in this website that has been selected by the customer to buy the particular product/s that are subject to this Policy (Store). The Store is not required to provide a refund or replacement if the customer changes their mind. But the customer can choose a refund or exchange if a product has a major problem. View the Full Return Policy.
What you need to know before purchasing
Not all stores carry stock of this product, but will order it in for you.
Please allow up to 14 days for stock to arrive at your selected store.
Products are available while stocks last.
Contact your local store to check stock availability.
Images are for illustration purposes only.
Price is available to online purchases only.
Price when purchasing in-store may vary.
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any further reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
