Hardie™ Oblique™ Cladding

CladdingCladding

Hardie™ Oblique™ Cladding evokes a striking, contemporary aesthetic with wide grooves and bespoke design flexibility.

A fresh slant on a modern home design

Hardie™ Oblique™ Cladding is the only Hardie™ exterior cladding with a slanted groove edge, delivering highlights and shadows. Available in 200mm and 300mm widths, these 14mm thick shiplap boards offer multiple installation options and allow for simple alternation or unique combinations. The boards are primed and ready to paint. Similar in appearance to standing seam metal cladding it's an easy-to-install fibre cement solution.

Key features

  • Hardie™ Oblique™ Cladding does not require specialist installers, helping to reduce the number of trades onsite and the complexity of the installation.
  • For vertical installation 2750mm lengths suit common wall heights which can help reduce waste. 4200mm lengths give tall walls a continuous look, reducing the need for horizontal joints.
  • Deemed non-combustible. Up to 60 minute Fire Resistance Level (FRL) can be achieved when installed as part of the Hardie™ Smart Fire & Acoustic Wall System.
  • Deemed non-combustible. Adheres to Bushfire Attack Level (BAL) requirements up to BAL40.
Grooves CladdingGrooves Cladding
Grooves

23mm wide and 6mm, with the option to place the oblique edge to the left or right.

Highlights CladdingHighlights Cladding
Highlights

When orientated northwards the slanted edge creates depth and elevation.

Width CladdingWidth Cladding
Width

200mm or 300mm wide, with 175mm or 275mm groove spacing.

Colour CladdingColour Cladding
Colour

Supplied primed for the paint colour of your choice.

Versatility CladdingVersatility Cladding
Versatility

Install vertically or horizontally, re-clad existing homes or use from the ground up for a new build or extension.

Innovation CladdingInnovation Cladding
Innovation

Our innovative Hardie™ Castellated Batten method makes vertical installation and bespoke arrangements easy.

 

 

New Hardie™ Castellated Batten:

 

Vertical installation made possible by our NEW Hardie™ Castellated Battens. A non-structural horizontal timber batten for cavity construction. The grooves provide drainage and ventilation. 

 

Use with Hardie™ Oblique™ and Stria™ Cladding shiplap boards in a vertical orientation.

 

Before you start installing Hardie™ Oblique™ Cladding, read the Installation Guide.

Castellated BattenCastellated Batten

TRADE QUALITY BRANDS

We Supply ITI Australia Products We Supply James Hardie Products We Supply Hyne Timber Products We Supply Hume Doors We Supply Cement Australia Products We Supply the HB Fuller Range We Supply an Extensive ITW Proline Range We Supply Corinthian Doors We Supple Bradford Insulation We Supply Paslode Nailers and Framers We Supply Tasman KB Outdoor Timbers

Shall we send you a message when we have promotions available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.