The Naleon Ultimate Hair Dryer Holder is perfect when you need extra storage or organization for your home, office, or caravan. With advanced suction technology, which creates a long-lasting suction, the Ultimate range covers all your storage needs. For ultimate performance, you cannot surpass the Ultimate suction range of products from Naleon.
Follow these steps for easy installation.
The surface and rubber base must be clean and dry before installation.
Install the suction unit onto the product. Before installation make sure the rubber base is flat.
Loosen the knob until the rubber base is flat by turning counter-clockwise. Position the product onto the surface and press the knob lightly to release air.
Press the cap onto the wall firmly. Whilst maintaining pressure, turn the knob clockwise until completely tight.
To ensure lasting suction it is recommended that the product be removed every 2-3 months and the suction pad and mounting surface be cleaned with a damp cloth. When re-mounting the product please ensure that the suction pad and mounting surface are completely dry.
Disclaimer
LN Marketing accepts no responsibility for any loss or damage by any person as a result of the use or misuse of these goods. In case any defect in the goods, LN Marketing shall be limited solely to the replacement of the defective goods.
Items sold on the Mitre 10 website are delivered from a local Mitre 10 store or a supplier partner. Select your delivery suburb or postcode above to see availability and estimated times.
Returns
This Policy is provided by the Mitre 10 store participating in this website that has been selected by the customer to buy the particular product/s that are subject to this Policy (Store). The Store is not required to provide a refund or replacement if the customer changes their mind. But the customer can choose a refund or exchange if a product has a major problem. View the Full Return Policy.
What you need to know before purchasing
Not all stores carry stock of this product, but will order it in for you subject to availability and where local laws permit.
Products are available while stocks last.
Contact your local store to check stock availability.
Images are for illustration purposes only.
Price is available to online purchases only.
Price when purchasing in-store may vary.
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any further reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
Follow these steps for easy installation.
The surface and rubber base must be clean and dry before installation.
Install the suction unit onto the product. Before installation make sure the rubber base is flat.
Loosen the knob until the rubber base is flat by turning counter-clockwise. Position the product onto the surface and press the knob lightly to release air.
Press the cap onto the wall firmly. Whilst maintaining pressure, turn the knob clockwise until completely tight.
To ensure lasting suction it is recommended that the product be removed every 2-3 months and the suction pad and mounting surface be cleaned with a damp cloth. When re-mounting the product please ensure that the suction pad and mounting surface are completely dry.
Disclaimer
LN Marketing accepts no responsibility for any loss or damage by any person as a result of the use or misuse of these goods. In case any defect in the goods, LN Marketing shall be limited solely to the replacement of the defective goods.
