The Makita 1100W SDS Max Rotary Hammer is intended for hammer drilling in brick, concrete and stone as well as for chiselling work. The revolutions and blows per minute can be adjusted just by turning the adjusting dial. The dial is marked 1 (lowest speed) to 5 (full speed).
- 2 Mode operation: Rotation and hammering and Hammering only
- Torque limiter protects tool and operator if the bit should jam
- Dual switch mechanism for easier use
- Lock-on switch
- Trigger switch
- Constant speed control
- Soft start
- LED power and service light indicators
- Variable speed control by dial
Continuous rating input: 1,100W
Impact energy: 8.3j
Impact Rate: 1,450 - 2,900ipm
Max. drilling capacities in concrete: 40mm
Net Weight: 6.2kg
No Load Speed: 250 - 500rpm
Noise dB: 92dB
Overall Length: 479mm
Power supply cord: 5.0m
Vibration per min: 10.0m/s²