The Berlin series is the latest European design. It has a unique bevel design that perfectly combines square and round. This unique design is having deep impression on many consumers and designers, always been favoured by consumers. The Berlin series is made of multiple exquisite craftsmanship and the latest low-lead brass material. Each product is strictly selected and has high durability and reliability.
Made from high-quality materials for longevity and reliability
Designed for straightforward setup, allowing for quick upgrades to your basin
Complements various bathroom styles, enhancing both functionality and aesthetics
Specifications 3.5 times matte black electroplating Colour: Matte Black Colour Plating: Electroplating WELS rating: 6star – 4.0L/min WELS registration: T43300 Watermark License: WMK26248 Temperature Rating: Min 1℃-Max 75℃
The Berlin series is the latest European design. It has a unique bevel design that perfectly combines square and round. This unique design has a deep impression on many consumers and designers and has always been favoured by consumers. The Berlin series is made of multiple exquisite craftsmanship and the latest low-lead brass material. Each product is strictly selected and has high durability and reliability.
After every use, wash with a mild soap or mild detergent with warm water. Wipe gently over the surface with a clean soft cloth. No undue pressure is required. For our Colour Finished Tapware we recommend extra care to be taken. Use of wax-based furniture cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.
Aerator in the tapware must be cleaned. We recommend undertaking cleaning every 4 to 6 months. To ensure a stable water flow please make sure you have a stable water pressure for 500KPA. No harsh detergents for cleaning at any time.
THINGS NOT TO DO
Do not use any metallic souring pads and steel wool pads, solvents, bleaches, drain cleaning products or any other liquids or agents as these products will dull and tarnish the finish. It could lead to staining or discoloration.
Disclaimer
This warranty shall be void for the following reasons,
*A customer’s inability to provide POP or equivalent documentation.
*Products are not installed by a licensed plumber.
*Products are not installed to relevant National Standards and State Regulations.
*Products are not installed in accordance with the manufacturer’s installation instructions.
*Water pressures and or temperatures that exceed stated limitations as per the product installation instructions. NOTE: AS/NZS 3500.1-2003 (Clause 3.3.4) specifies 500kPa maximum water supply pressure at any outlet within a building for new installations. The 500kPa maximum water supply pressure doesn’t apply to fire service outlets.
*Isolation stop taps are not fitted as stated on manufacturer’s installation instructions.
*Fitting of other devices to the outlet of tapware (e.g. Water filters).
*Fair wear and tear, such as the working seals in the inlet and outlet valves, including scratching from cleaning etc.
*Failure to regularly clean or replace dirty or blocked outlet aerator inserts in tapware and/or shower heads etc.
*Non-installation of flow regulator in tapware and showers or regulated valve or check valves in hand showers or veggie mixers.
Items sold on the Mitre 10 website are delivered from a local Mitre 10 store or a supplier partner. Select your delivery suburb or postcode above to see availability and estimated times.
Returns
This Policy is provided by the Mitre 10 store participating in this website that has been selected by the customer to buy the particular product/s that are subject to this Policy (Store). The Store is not required to provide a refund or replacement if the customer changes their mind. But the customer can choose a refund or exchange if a product has a major problem. View the Full Return Policy.
What you need to know before purchasing
Not all stores carry stock of this product, but will order it in for you subject to availability and where local laws permit.
Products are available while stocks last.
Contact your local store to check stock availability.
Images are for illustration purposes only.
Price is available to online purchases only.
Price when purchasing in-store may vary.
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any further reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
After every use, wash with a mild soap or mild detergent with warm water. Wipe gently over the surface with a clean soft cloth. No undue pressure is required. For our Colour Finished Tapware we recommend extra care to be taken. Use of wax-based furniture cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.
Aerator in the tapware must be cleaned. We recommend undertaking cleaning every 4 to 6 months. To ensure a stable water flow please make sure you have a stable water pressure for 500KPA. No harsh detergents for cleaning at any time.
THINGS NOT TO DO
Do not use any metallic souring pads and steel wool pads, solvents, bleaches, drain cleaning products or any other liquids or agents as these products will dull and tarnish the finish. It could lead to staining or discoloration.
Disclaimer
This warranty shall be void for the following reasons,
*A customer’s inability to provide POP or equivalent documentation.
*Products are not installed by a licensed plumber.
*Products are not installed to relevant National Standards and State Regulations.
*Products are not installed in accordance with the manufacturer’s installation instructions.
*Water pressures and or temperatures that exceed stated limitations as per the product installation instructions. NOTE: AS/NZS 3500.1-2003 (Clause 3.3.4) specifies 500kPa maximum water supply pressure at any outlet within a building for new installations. The 500kPa maximum water supply pressure doesn’t apply to fire service outlets.
*Isolation stop taps are not fitted as stated on manufacturer’s installation instructions.
*Fitting of other devices to the outlet of tapware (e.g. Water filters).
*Fair wear and tear, such as the working seals in the inlet and outlet valves, including scratching from cleaning etc.
*Failure to regularly clean or replace dirty or blocked outlet aerator inserts in tapware and/or shower heads etc.
*Non-installation of flow regulator in tapware and showers or regulated valve or check valves in hand showers or veggie mixers.
