Perfect for hard-to-reach areas & maneuvering around furniture
With Cabot's EasyDeck clean and coat maintenance system, you can quickly and easily refresh the look of your timber and be back on your deck in 40 minutes.*
Designed conveniently, the EasyDeck Applicator allows you to effortlessly coat your timberdecking and stairs and easily navigate outdoor furniture. It's backed by a 3-year warranty and the included applicator pad effectively removes dirt and dust, ensuring a consistent and seamless application of the EasyDeck Maintenance Coat. EasyDeck is designed for application over existing water-based coatings that are in good condition. Cabot's EasyDeck is the fast, no-mess deck refresher.
*Conditions of 25°C and 50% relative humidity. More humid or cooler conditions will need longer drying times.
After use, twist and remove the EasyDeck™ bottle from the applicator body vertically without tilting to avoid ejection of the silicon seal from the dispensing nozzle and prevent spillage. Replace the dispensing nozzle with the bottle cap. Unused EasyDeck™ coating can be stored upright in a cool, dry area for up to a year. Rinse the Dispensing Nozzle until the valve is clean and the water runs completely clear. Remove the EasyDeck™ Applicator Pad and leave to soak, then rinse under running water until the water runs clear and the pad returns to it's original colour. Rinse the applicator body and pad area under running water. Then, while still under running water, pump the yellow cleaning levers to flush water through the mechanism. Continue until the rinsed water is completely clear. Let components dry thoroughly before storing in a cool, covered area. Store with or without the pole attached.
Disclaimer
*Conditions of 25°C and 50% relative humidity. More humid or cooler conditions will need longer drying times.
Items sold on the Mitre 10 website are delivered from a local Mitre 10 store or a supplier partner. Select your delivery suburb or postcode above to see availability and estimated times.
Returns
This Policy is provided by the Mitre 10 store participating in this website that has been selected by the customer to buy the particular product/s that are subject to this Policy (Store). The Store is not required to provide a refund or replacement if the customer changes their mind. But the customer can choose a refund or exchange if a product has a major problem. View the Full Return Policy.
What you need to know before purchasing
Not all stores carry stock of this product, but will order it in for you subject to availability and where local laws permit.
Products are available while stocks last.
Contact your local store to check stock availability.
Images are for illustration purposes only.
Price is available to online purchases only.
Price when purchasing in-store may vary.
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any further reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
After use, twist and remove the EasyDeck™ bottle from the applicator body vertically without tilting to avoid ejection of the silicon seal from the dispensing nozzle and prevent spillage. Replace the dispensing nozzle with the bottle cap. Unused EasyDeck™ coating can be stored upright in a cool, dry area for up to a year. Rinse the Dispensing Nozzle until the valve is clean and the water runs completely clear. Remove the EasyDeck™ Applicator Pad and leave to soak, then rinse under running water until the water runs clear and the pad returns to it's original colour. Rinse the applicator body and pad area under running water. Then, while still under running water, pump the yellow cleaning levers to flush water through the mechanism. Continue until the rinsed water is completely clear. Let components dry thoroughly before storing in a cool, covered area. Store with or without the pole attached.
Disclaimer
*Conditions of 25°C and 50% relative humidity. More humid or cooler conditions will need longer drying times.
