- 36" x 2" (915 x 50mm) belt - 100 Grit
- 7" (178mm) diameter disc - 120 Grit
- 3 1/2" (89mm) diameter rubber contact wheel
- 5 1/2" (140mm) diameter drive wheel
Efficiency - Superior performance and a user-friendly, toolless belt change in under 5 seconds.
Versatility - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
Accurate Tracking - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
Quality Construction - Robust, maintenance-free with sealed ball bearings, hardened and ground essential components and zinc plating.
3-year Warranty - Against faulty materials and workmanship, even when used commercially.
Combine the robust TM400-150 ITM 150mm Bench Grinder with one of Australia's leading belt grinding attachments PO362.
TM400-150Powerful 370W Induction Motor
25mm width grinding wheels
Cast iron body and base for long-lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Run motor for maximum performance.
Fully adjustable tool rests for ease of use and maximum user control.
Large eye shield for increased user safety.
PO362
The Multitool is a renowned, Australian-designed belt grinding attachment that can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated workstation ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.