The self-adhesive white range by Naleon is made from ABS plastic which will not yellow or go brittle. The self-adhesive range is easy to install and mounts to most smooth surfaces. To remove, simply heat the mounting base of the product with a hair dryer. While maintaining the heat, gently lift the product off the wall surface. Any residue glue can be removed with eucalyptus oil. Ideal for the home, office or caravan the Naleon self-adhesive white range makes storage easy but without the expense.
Self-adhesive
ABS White Plastic ( will not yellow or go brittle)
Easy Installation
Wipe clean the desired surface and let dry. Peel off the protective cover of the adhesive strips. Press the product evenly and hard against the wall for 30 seconds. For the best result, leave the product on the surface for 24 hours before use. Installation is completed.
Removal - To remove the product, use hair dryer to heat the adhesive strips then gently scrape off using a plastic scraper.
Disclaimer
LN Marketing accepts no responsibility for any loss or damage by any person as a result of the use or misuse of these goods. In case any defect in the goods, LN Marketing shall be limited solely to the replacement of the defective goods.
Items sold on the Mitre 10 website are delivered from a local Mitre 10 store or a supplier partner. Select your delivery suburb or postcode above to see availability and estimated times.
Returns
This Policy is provided by the Mitre 10 store participating in this website that has been selected by the customer to buy the particular product/s that are subject to this Policy (Store). The Store is not required to provide a refund or replacement if the customer changes their mind. But the customer can choose a refund or exchange if a product has a major problem. View the Full Return Policy.
What you need to know before purchasing
Not all stores carry stock of this product, but will order it in for you subject to availability and where local laws permit.
Products are available while stocks last.
Contact your local store to check stock availability.
Images are for illustration purposes only.
Price is available to online purchases only.
Price when purchasing in-store may vary.
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any further reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
Easy Installation
Wipe clean the desired surface and let dry. Peel off the protective cover of the adhesive strips. Press the product evenly and hard against the wall for 30 seconds. For the best result, leave the product on the surface for 24 hours before use. Installation is completed.
Removal - To remove the product, use hair dryer to heat the adhesive strips then gently scrape off using a plastic scraper.
Disclaimer
LN Marketing accepts no responsibility for any loss or damage by any person as a result of the use or misuse of these goods. In case any defect in the goods, LN Marketing shall be limited solely to the replacement of the defective goods.
