Inline fan connects to 100mm diameter ducting. Trade quality, powerful airflow - ideal for exhausting bathrooms toilets laundries, room-to-room air transfer or venting subfloors and roofs.
Specifications Air Flow - 149m3/h (41L/S) Watts - 26W Input - 240V - 50Hz Ducting - 100mm d IP Rating - IP22 Pressure - 58Pa
Increases healthy fresh air circulation with high-performance (149m3/h) energy-efficient motor
Easy-fit mounting brackets with duct tabs and DIY plug and lead
Quality fan motor with Japanese bearings and copper wiring and Compliant with 2022 NCC 10.8.2 (1) flow rate requirements
Rated to 50,000 hours of continuous run time and suitable for indoor or covered outdoor use
Can be mounted horizontally or vertically with a low noise output
1. We recommend an annual inspection to ensure there is no excessive accumulation of dirt or dust on the impeller.
2. Before cleaning or maintenance, shut off power and disconnect from the
mains supply.
3. Prevent the possibility of anyone else connecting the power while maintenance is being undertaken.
4. Clean with a damp (not wet) cloth. Do not use abrasive or detergent cleaning products.
5. All maintenance and repair work must be carried out by a licensed Electrician in accordance with all applicable National / local codes and safety standards.
Disclaimer
This fan is warranted against defects in manufacturing and workmanship for a period of 3 years. The warranty does not extend to installation of the unit or any associated wiring or any damage caused by installation or wiring.
The installation must be conducted by a licensed electrician and a suitable
certificate of safety is to be issued by the electrician who installed it.
Warranty claims will be voided unless a certificate of safety can be produced when required, prior to service or repair.
The warranty does not cover damages or loss caused by
1. Any consequential losses arising from incorrect installation or operation or
maintenance of this product.
2. Any consequential losses arising from incorrect wiring of this product
3. Any modifications or changes make to the unit, other than those
recommended by the Manufacturer.
4. An accident or damage caused to the fan after purchase
Note that general wear and tear is not covered by the warranty.
Please ensure that your installer also reads this information.
Proof of purchase of the fan is required.
If you consider there are faults relating to the installation, contact your installer to rectify. If you consider there is a manufacturing defect to the fan, contact Partner Pacific.
Items sold on the Mitre 10 website are delivered from a local Mitre 10 store or a supplier partner. Select your delivery suburb or postcode above to see availability and estimated times.
Returns
This Policy is provided by the Mitre 10 store participating in this website that has been selected by the customer to buy the particular product/s that are subject to this Policy (Store). The Store is not required to provide a refund or replacement if the customer changes their mind. But the customer can choose a refund or exchange if a product has a major problem. View the Full Return Policy.
What you need to know before purchasing
Not all stores carry stock of this product, but will order it in for you subject to availability and where local laws permit.
Products are available while stocks last.
Contact your local store to check stock availability.
Images are for illustration purposes only.
Price is available to online purchases only.
Price when purchasing in-store may vary.
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any further reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
1. We recommend an annual inspection to ensure there is no excessive accumulation of dirt or dust on the impeller.
2. Before cleaning or maintenance, shut off power and disconnect from the
mains supply.
3. Prevent the possibility of anyone else connecting the power while maintenance is being undertaken.
4. Clean with a damp (not wet) cloth. Do not use abrasive or detergent cleaning products.
5. All maintenance and repair work must be carried out by a licensed Electrician in accordance with all applicable National / local codes and safety standards.
Disclaimer
This fan is warranted against defects in manufacturing and workmanship for a period of 3 years. The warranty does not extend to installation of the unit or any associated wiring or any damage caused by installation or wiring.
The installation must be conducted by a licensed electrician and a suitable
certificate of safety is to be issued by the electrician who installed it.
Warranty claims will be voided unless a certificate of safety can be produced when required, prior to service or repair.
The warranty does not cover damages or loss caused by
1. Any consequential losses arising from incorrect installation or operation or
maintenance of this product.
2. Any consequential losses arising from incorrect wiring of this product
3. Any modifications or changes make to the unit, other than those
recommended by the Manufacturer.
4. An accident or damage caused to the fan after purchase
Note that general wear and tear is not covered by the warranty.
Please ensure that your installer also reads this information.
Proof of purchase of the fan is required.
If you consider there are faults relating to the installation, contact your installer to rectify. If you consider there is a manufacturing defect to the fan, contact Partner Pacific.
