Crescent locking pliers are made to exacting standards that result in improved durability and long-term performance. They meet stringent ASME standards B107.24 and B107.36, as applicable, including proven strength and maximum jaw opening capacity. All Crescent locking pliers have a cushion grip trigger for easier grip release and a hex key recess in the tightening screw for when additional leverage is needed. The clamps head and body have the narrow profile necessary for work in tight or confined spaces.
After the initial grip is set, the clamp can be tightened further by turning the adjusting screw with a hex key
Compound action for powerful non-slip locking grip
Plastisol dip on release lever for improved comfort
Warranty
Crescent® hand tools are warranted for Life to be free of defects in material and workmanship. Carrying cases, pouches, accessory bits and consumable products, if any, are not covered by this Warranty.
Crescent - Warranty
Apex warrants to each original Customer of Products sold by Apex that such Products (excluding carrying cases and storage accessories and the product categories set forth below) are, at the time of delivery to the Customer, free of material and workmanship defects, provided that no warranty is made with respect to: (a) any Product which has been modified, disassembled and/or reassembled or altered in any way or improperly installed; (b) any Product which has, in Apex’s judgment, been subject to negligence, misuse, abuse, accident, improper storage or damage during shipment; (c) any Product which has not been operated and maintained in accordance with normal practice and in conformity with recommendations and published specifications of Apex; and (d) any Products which have been serviced or repaired by anyone other than an Authorized Repair Center of Apex or modified by anyone other than Apex. Normal wear and tear is also excluded.
Product Exceptions to the Standard Limited Lifetime Warranty:
Tool Boxes, Standard Chucks and Accessories, Bits, Bit Sockets Torque Products.
Soldering and De-Soldering Products are warranted only for one (1) year from the date of Buyer acceptance.
Accuracy standards for calibration on Torque Products are warranted for 90 days from the date of buyer acceptance. Torque Products in North America must be sent to Angle Repair & Calibration Service, Inc., 175 Angle Drive, Beckley, West Virginia 25801 (304) 253-5729 at the Customer’s cost for evaluation. Product meeting warranty criteria will be repaired or replaced subject to Apex’s sole discretion. Torque Product components are subject to normal wear through use and replacement thereof is the responsibility of the Customer. These warranties set forth herein are the sole warranties applicable to Products and is in lieu of all other warranties, whether express, implied or statutory. The implied warranties of merchantability and fitness for a particular purpose are specifically excluded.
Claims should be returned, with proof of purchase, to the place of purchase.
This Warranty shall not apply to Products that have been misused, abused, damaged by accident or otherwise, repaired by anyone other than an Authorized Repair Center or modified by anyone other than Apex Tool Group and is in lieu of all other warranties, whether express, implied or statutory. THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. Buyer’s sole and exclusive remedy for breach of this Warranty is, at the option of Apex Tool Group, repair or replacement of the defective Product. IN NO EVENT WILL THE APEX TOOL GROUP BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES ARISING FROM BREACH OF THIS WARRANTY, EVEN IF APEX TOOL GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The Apex Tool Group is not responsible for personal injury or damage resulting from improper tool usage, product modification, abuse or usage beyond expected product life.
Many Mitre 10 stores offer a local delivery service. Contact your local store about what options you have for local delivery.
Returns
This Policy is provided by the Mitre 10 store participating in this website that has been selected by the customer to buy the particular product/s that are subject to this Policy (Store). The Store is not required to provide a refund or replacement if the customer changes their mind. But the customer can choose a refund or exchange if a product has a major problem. View the Full Return Policy.
What you need to know before purchasing
Not all stores carry stock of this product, but will order it in for you.
Please allow up to 14 days for stock to arrive at your selected store.
Products are available while stocks last.
Contact your local store to check stock availability.
Images are for illustration purposes only.
Price is available to online purchases only.
Price when purchasing in-store may vary.
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any further reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
Warranty
Crescent® hand tools are warranted for Life to be free of defects in material and workmanship. Carrying cases, pouches, accessory bits and consumable products, if any, are not covered by this Warranty.
Crescent - Warranty
Apex warrants to each original Customer of Products sold by Apex that such Products (excluding carrying cases and storage accessories and the product categories set forth below) are, at the time of delivery to the Customer, free of material and workmanship defects, provided that no warranty is made with respect to: (a) any Product which has been modified, disassembled and/or reassembled or altered in any way or improperly installed; (b) any Product which has, in Apex’s judgment, been subject to negligence, misuse, abuse, accident, improper storage or damage during shipment; (c) any Product which has not been operated and maintained in accordance with normal practice and in conformity with recommendations and published specifications of Apex; and (d) any Products which have been serviced or repaired by anyone other than an Authorized Repair Center of Apex or modified by anyone other than Apex. Normal wear and tear is also excluded.
Product Exceptions to the Standard Limited Lifetime Warranty:
Tool Boxes, Standard Chucks and Accessories, Bits, Bit Sockets Torque Products.
Soldering and De-Soldering Products are warranted only for one (1) year from the date of Buyer acceptance.
Accuracy standards for calibration on Torque Products are warranted for 90 days from the date of buyer acceptance. Torque Products in North America must be sent to Angle Repair & Calibration Service, Inc., 175 Angle Drive, Beckley, West Virginia 25801 (304) 253-5729 at the Customer’s cost for evaluation. Product meeting warranty criteria will be repaired or replaced subject to Apex’s sole discretion. Torque Product components are subject to normal wear through use and replacement thereof is the responsibility of the Customer. These warranties set forth herein are the sole warranties applicable to Products and is in lieu of all other warranties, whether express, implied or statutory. The implied warranties of merchantability and fitness for a particular purpose are specifically excluded.
Claims should be returned, with proof of purchase, to the place of purchase.
This Warranty shall not apply to Products that have been misused, abused, damaged by accident or otherwise, repaired by anyone other than an Authorized Repair Center or modified by anyone other than Apex Tool Group and is in lieu of all other warranties, whether express, implied or statutory. THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. Buyer’s sole and exclusive remedy for breach of this Warranty is, at the option of Apex Tool Group, repair or replacement of the defective Product. IN NO EVENT WILL THE APEX TOOL GROUP BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES ARISING FROM BREACH OF THIS WARRANTY, EVEN IF APEX TOOL GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The Apex Tool Group is not responsible for personal injury or damage resulting from improper tool usage, product modification, abuse or usage beyond expected product life.
