IHG SKU
7005457
Wishlist
$170
pay with paypal pay with afterpay pay with humm pay with zip

Or buy now with interest-free installments

PayPal Pay in 4 on orders $30-$2,000

Available on orders up to $3,000

Available on orders up to $12,000

Interest free always, up to $1,000

  • Super powerful 375m3/h airflow - for rooms up to 40m3
  • DIY plug and lead
  • Low noise output with built-in backdraft damper
  • 295mm cut-out for easy retro fit (template provided)
  • Commercial grade high quality Japanese ball bearing motor
  • Complies with AS/NZS 60598.2.2:2021 and AS/NZS 60598.1:2013 and SAA certified
In stock

Alpine Ventilation Header Box Exhaust Fan 250FX

Specifications
Product Identifiers
IHG SKU
7005457
National SKU
824515
Barcode
9350571002912
Product Code
RF250
Product Details
Assembly Required
No
Material
ABS and Metal
Brand
Alpine Ventilation
Weight (kg)
3.45
Assembled Dimensions (mm)
Height (mm)
240
Width (mm)
367
Depth (mm)
365
Product Dimensions
Diameter
250
Warranty & Care
Care Instructions
1. Before cleaning or maintenance, shut off power and disconnect from the mains supply. 2. Prevent the possibility of anyone else connecting the power while cleaning, inspecting or maintaining. 3. All maintenance and repair work must be carried out by a licensed Electrician in accordance with all applicable National / local codes and safety standards.
Disclaimer
This fan is warranted against defects in manufacturing and workmanship for a period of 3 years. The warranty does not extend to installation of the unit or any associated wiring or any damage caused by installation or wiring. • The installation must be conducted by a licensed electrician and a suitable certificate of safety is to be issued by the electrician who installed it. • Warranty claims will be voided unless a certificate of safety can be produced when required, prior to service or repair. Note that general wear and tear is not covered by the warranty. Proof of purchase of the fan is required.
Warranty
3 years
Product Details

Premium high-flow multi-purpose ceiling fan for bathrooms, toilets and laundries. Alpine Ventilation's AC Header Box Exhaust Fan is a premium, trade quality model that sets a new standard in performance, noise and ease of installation. Stiff centrifugal ABS blades combined with a powerful motor with Japanese bearings provide the highest performance and reliability available. This fan may be appropriate for new buildings and as a replacement and can be used in both residential and commercial applications.

Specifications
Air Flow - 375m3/h (104L/S)
Watts - 60W
Noise at 3M - 38db
IP Rating - IPX2
Min Install Depth - 210mm
Cut-out size - 295mm
Voltage - 220-240V,-50Hz
Current - 0.29A
Weight - 3.4kg
Standards Compliance - AS/NZS 60598.2.2:2021, AS/NZS 60598.1:2013, IEC 60665
Compliant with 2022 NCC 10.8.2 (1) flow rate requirements

  • Super powerful 375m3/h airflow - for rooms up to 40m3 with a DIY plug and lead with a low noise output
  • Built-in backdraft damper and 295mm cut-out for easy retrofit (template provided)
  • Commercial grade high-quality Japanese ball bearing motor and IPX2 rated with mounting clips for easy installation
  • Complies with AS/NZS 60598.2.2:2021 and AS/NZS 60598.1:2013 and SAA certified
  • High-quality ABS impeller and casing (not PP or PS) and single-piece clip-on 150mm diameter spigot
  • Clip-out face for easy cleaning with high airflow makes the fan suitable for long duct runs with low profile - ideal for multi-storey buildings - only requires 210mm clearance
Specifications
Product Identifiers
IHG SKU
7005457
National SKU
824515
Barcode
9350571002912
Product Code
RF250
Product Details